Things To Do When Waiting For Exam Results

After your exams, you binge on caffeine, spend sleepless nights and bear a lot of stress. Well, it happens, especially when the result day is close. At times, the stress you have after exams is far intense than the stress you have during exams. There is no doubt that coping with this stress is difficult, but the tips below can help you keep the anxiety at arm’s length.

Move on

No matter what you do, you can’t go back in time to make changes. What is done is done. There is no use of comparing the answers. As a matter fact, doing so will do nothing except adding to your level of anxiety. So, take your time and move on.

Stay away from online forums

After your exams, stay away from online forums until the result announcement day. Although these forums are great places to spend time on, you shouldn’t go there just to see what others have to say about their performance in the exams. Reading the remarks of others about the exams on these online platforms may intensify your stress. Don’t sit idle

What you need to do is keep yourself busy. In other words, if you keep yourself occupied, your mind won’t pay attention to the result day. For instance, you can get a job or join a gym to keep yourself occupied. You can also start a hobby, such as gardening or photography.

Talk to a Friend

Spend time with your close friend and share your worries with them. Keeping it to yourself will only increase your depression. What you need to do is let your worries come out gradually at a certain pace rather than growing it inside you.

Write your worries on paper

In your free time, write you worries down on a piece of paper and then burn it down. While it seems odd, this technique will work wonders and you will feel better.

Sleep Well

Sleeping well is necessary if you want to stay fit both mentally and physically. It will also improve your quality of life. Ideally, you may want to get at least 8 hours of sleep in 24 hours.

Don’t drink

Alcohol can’t help you to stay happy. Instead, you should eat something healthy. You can drink milk or fruit juice, for instance. Be positive

Why should you be optimistic? Well, the biggest benefit of being positive is that it will help you lower your stress level. And this will help you deal with the stress on the result day. The least you can do is smile at others whenever you meet them. According to scientists, when you smile, you release a chemical known as endorphine. The stress hormone called Cortisol is also reduced. Therefore, you can get rid of stress by smiling.

In short, you will find these tips helpful. Keep in mind that stress will have a bad impact on your health. To stay in good shape, what you need to do is keep yourself busy, eat healthy and smile at others.

Posted in Uncategorized | Comments Off on Things To Do When Waiting For Exam Results

Autodesk : Top 4 New Features

Autodesk introduced AutoCAD 2017 in March 2016 aiming to help its users stay at the forefront. This latest release lets you work quicker and smarter across connected desktop and mobile solutions, create personalized design experiences, easily team up with colleagues, and stay updated with the latest features and updates. AutoCAD 2017 also includes AutoCAD 360 Pro, a mobile app that allows users use AutoCAD on the go. The latest version addresses several user functionality requests and delivers features that enhance everything from workflows to graphics processing. According to Autodesk, several AutoCAD users globally will be benefitted by several enhancements that have been added in the latest version, such as enhanced 3D printing, new features such as ‘smart centrelines’, share design views on cloud and improvements to PDF handling features.

In the updated features of the 2017 version, PDFs have been added to the supported ‘import file’ formats. As a result, users can import geometry, True Type text and raster images from a PDF file or underlay into the current drawing as AutoCAD objects. Also, the centerlines and center marks get updated accordingly when users move associated objects. Learning content and product updates are seamlessly delivered to help users get the most out of new features with Autodesk Desktop app, an application that substitutes Autodesk Application Manager. Here, users also tend to get the latest security patches and updates for all 2015, 2016, and 2017 versions of Microsoft Windows based Autodesk products. Now, let’s discuss the top 4 new features that Autodesk has included in its AutoCAD 2017 release. Top 4 New Features in Autodesk AutoCAD 2017

Enhanced 3D printing

Utilising the new Autodesk print studio you can create a 3D print ready file and directly print it in nearly all types of 3D printers. This 3D printing tool is offered by spark technologies and is available for 64 bit machines only. To make full use of this tool, you need to go to AutoCAD 3D modelling workspace and select print studio tool from 3D print panel of output tab. If it’s the first time you are using this tool then a prompt will appear from where you can download this tool. After you’ve downloaded and installed, click on print studio again and click on watertight or closed mesh object from your drawing which you want to use for 3D printing.

Smart Centrelines and Centre marks

This new AutoCAD release lets you to easily add centre lines and centre marks to the geometry. Likewise, you need to type the command ‘Centremark’ and click on circular object to create the centre mark, you can use this command to make a centre mark on circle, arc and fillet. Share Design Views on Cloud

Now, you can directly share files with users who don’t even have AutoCAD using A360 cloud account and all they require is a web browser for accessing shared drawing. In order to share a drawing, ensure that you’re logged into your Autodesk 360 cloud and your drawing is saved.

Co-ordination Model

In AutoCAD 2017 coordination model functionality has been improved with support for object snaps. Attach a Navisworks or BIM 360 Glue model to your AutoCAD drawing so you can view it as an underlay. Then just use the standard AutoCAD endpoint and center object snaps to snap to exact locations as you create and edit your design based on the attached models.

Posted in Uncategorized | Comments Off on Autodesk : Top 4 New Features

Degree Results : A Short Analysis

Like the past years, Manabadi Degree Results 2017 will be released in the month of March. Appeared candidates can check their results online. Under it, 1st, 2nd, 3rd Year result of BA, B.Sc, B.Com, BCA, and BBM exam will be published. As the sources say numerous students from different disciplines will be taking part in it. Almost all qualified students inside different kinds of degree plans can appear for this. The whole exam process will be controlled online.

There are adequate sources and online portals for examining the results of different types of programs. Students are eligible to get the results of all programs like Manabadi OU, YVU, VSU, AU, SVU, SKU, and Degree Results of Krishna University. They can have current details and find the outcomes instantly. The exam process is very easy. The students only need to type some required information. The process takes very little time and the result comes out immediately. Moreover, candidates might obtain recent information, updated details and other particulars according to their needs. Depending on the entered date and other information, the students can see veracious information on the screen. Multiple settings for examining ANU, VSU, OU, AU, KU, SKU, YVU, SVU, and Degree Results 2017 will be available for all kinds of college students pursuing their bachelor degrees. Moreover, experts are ensuring that it will be easily accessible for each student. They have added that the outcomes are easily modifiable to give access and entry to all kinds of candidates. It is mandatory to enter all required information in unique areas to confirm the eligibility of a candidate and get started with the test process. Therefore, enrollment with the right information and putting them online during the time of exam is highly required.

Only qualified students are eligible to examine and see the outcomes because students need to put some important information and fill some particulars areas. This is why the process is very transparent, quick and fast. Moreover, they will get to know their Manabadi results 2017 easily and instantly, sitting on their chairs in the exam hall. For this, they do not need to go to a different exam center. They can do all online from their home college. Before the exam, the students should get ready with their roll-number, registration number, etc. Once everything is all right, he or she can log into his account and get to see the questions. During the time of exam, one should keep his or her head cool. Questions are multiple type questions with clickable options at the left. No question is recoverable after submission.

Posted in Uncategorized | Comments Off on Degree Results : A Short Analysis

Sailboat And Yacht Detailers Companies Need To Think About Sail Cleaning Services

Sailing is the fun part, cleaning, well not so much. Still, if you don’t take care of your equipment, Murphy will take care of you. Luckily, for those of us in the sailboat and yacht cleaning business we can make money taking care of the challenges that go along with boat maintenance and keep repairs to a minimum by helping owners keep their vessels in ship-shape. I’d like to explain one aspect of boat cleaning that many boat detailers fail to take advantage of, and that is sail cleaning.

Why clean sails? Well, of course you want them to look good when you hoist them up, free from black mold and ugly salt marks. But that’s not the only reason, healthy sails will not chafe as easily, nor will their stitches come apart as much. Doubt what I am saying? Well, then let me recommend some required reading. In the January 2017 Issue of Sail Magazine there was a relevant article titled; “Sail Care – Look After Your Sails And They Will Look After You,” by Peter Nielsen. The article talked about the fact that if you don’t clean the dirt or salt off the sails, then you will have abrasions from the dirt and rats will smell the salt and be attracted to it, then make their nests there and eat away at the sail. Cleaning the sails is not hard to do, but many sailors and yacht owners do not have the time or are too tired after a day of sailing to clean them properly.

The article and most professional boat cleaners recommend soaking the sails in warm water and detergent, something mild and approved by the manufacturer – always remember that sails have different amounts of material and stitches in them and the manufacturer knows what’s best to use to prevent deterioration. After soaking the sails you want to thoroughly rinse them, I recommend soft or RO water. The article stated to rinse until you could no longer smell any detergent and I’d suggest you don’t smell any salt either and if you’ve rinsed them properly you won’t. It might take a couple of rinses to be sure. Charging $100 per sail is not unreasonable, but be careful if they haven’t been clean in a while, you’ll need to charge more for neglected sails or sails that are dirty or starting to come apart as you have to use a little elbow grease (lightly) and it will take you a lot longer to clean. However, if you regularly clean the sailboat for your customer, $80 to $100 for average sized sails turns out to be a nice add-on to your boat cleaning services, larger sails go up in price try $150 to $300. Think on this.

Posted in Uncategorized | Comments Off on Sailboat And Yacht Detailers Companies Need To Think About Sail Cleaning Services

The Artistic Way of Programming

12 years back, when I started my formal classes in computer science, the first thing I learnt was “data” means “information”. A few days after that, we started conventional programming, where code and data were treated separately. For example, only data can be passed as the functional arguments. It was difficult for me to digest that “code, which is also information, is not treated as data”. I strongly felt that this will increase complexity of softwares in the long run.

A system does three things – read, transform (processing data), write. In other words – the mathematics (the transform part), and the effect of that in real life (the read/write part). The data transformation is indeed a mathematical concept, and with the help of read and write we make the mathematics (the transform part) useful to the real world. Bringing the “transform” part fully inside mathematical domain has its own benefit of using mathematics without fear (possible errors) for the analysis of the system, making the system more tractable mathematically. The catch is to treat both the elements of transformations, data and functions, equally.

Initially, code used to be bigger than the data, so sending data over the wire was feasible. But with time, data becoming huge, sending code to systems over the wire becomes the need, resting the data on the systems intact. With big data, the need of the hour is to treat the code as data, so that the code can be taken as argument to another meta function on a system having huge data which expects an algorithm for transformations.

Roughly speaking, codes are algorithms, algorithms are mathematical functions, functions are in turn actually look-up tables, i.e. data. Hence with this principle, all codes or functions are data.This is exactly the cornerstone of the functional paradigm. The functional programming is programming with functions, they treat functions and data likewise. Another principle I love, to control complexity, rules should not be complex itself.

Thumb rules rewritten for the functional paradigm:

Read-write and transformations(algorithms) should be separate.
Use immutable variables. Discourage use of reassignment statements.
Discourage side-effects (input/output or changing any variable in-place), every function should ONLY return its expected result.
Use referentially transparent functions (sometimes it is called pure functions) with no side effects, i.e. if x = y, f(x) and f(y) should be same forever.
Unit testing is a must for each function.
One of the main design patterns should be followed is to use expressions instead of instructions, i.e. it should be declarative in nature. Discourage use of loops like for/while – use recursive statements as shown above to calculate sum. Tell computers what needs to be done, not how to do it – it reduces error, especially edge cases.
With the need to control the complexity of the system and the advance design, the design pattern for the functional composition can be made to follow some basic algebraic structures, which in turn becomes more robust.